Sonka Electronicpic

pic MSN Skype Mail to FaceBook

TEL:+86-755-36891238

keywords:

wobenchenmo|> www.23qianbao.com|> www.wanpi03.com|
Sonka is the leader of body scale.
Sonka Electronic Technology (Shenzhen) Co., Ltd.

Tel:+86-755-36891238

Fax:+86-755-86030992

E-mail:
sales2010@sonkascale.com
scales2010-1@sonkascale.com

Add:Floor 6, Block 8, Zhongyuntai Technology Industrial Park, Yingrenshi Tangtou No.1 Road, Shiyan Town, Baoan District, Shenzhen, Guangdong,China

Current location: Home » News Center » Frequently asked questions
maintainance--WRONG weight measuring result[ 2012-12-12 ]
WRONG weight measuring result:   cause Analysis Solution 1.The height measuring result displays"00" on the screen or when turning on the scale the scale ...
maintainace--WRONG or NO height measuring result[ 2012-12-11 ]
WRONG or NO height measuring result   Cause Analysis Solution 1.You measure several times but get different results or the voice repeats “Please do not move ...
noise problem for sk-v9[ 2012-11-26 ]
The solution for the noise: pls plug the audio cable well, then use a 16V2.2VF electrolytic capacitor plug into the audio cable, the positive electrode connect the white cable, the negative connect the black cable. Pls try it, if the noise decrease, then pls weld capacitor on back of the audio cable of the main board, pls note don't Welding reverse.
maintainance--The display screen does not work when turning on the scale.[ 2012-12-13 ]
The display screen does not work when turning on the scale:   cause analysis solution 1.The power indicator light is on, when turning on the scale. ...
maintainance-The computer interface can not work or the computer displays garbled letters.[ 2012-12-13 ]
The computer interface can not work or the computer displays garbled letters:   cause analysis solutions 1. Set up all the data correctly according to the user manu...
How to change coin mode to non coin mode for sk-x80[ 2012-11-30 ]
Step one:If you have not this cable as follows:Please do as following:
the steps of installing operation for SK-X80?[ 2012-11-26 ]
Step 1. Plz take apart the package and protective film, and then open the connected close plate,plz see the picture.
How to set 4 kinds of coin[ 2012-11-27 ]
Step 1, Open the back door of lower body and find the situation of coin acceptor. Step 2, The structure of coin acceptor as follow (ORIGINAL STAGE ): the two switches can move up and down to adjust the coin setting.
How to set a kind of coin?[ 2012-11-20 ]
Step 1, Open the back door of lower body and find the situation of coin acceptor.
How to change the code for SK-V9?[ 2012-11-26 ]
Pls use the RS232 line to link your machine and computer, another side is linked with our machine, see the photo as followings :
maintainance-No auto measuring[ 2012-12-13 ]
No auto measuring: casue:The scale can not measure automatically when someone on the Pan. analysis: 1.The scale is in manual mode. 2.The weighing sensor is damaged. 3.The weighting line do not plug in well. solutions: 1.Input "698" on the ...
adjust measurement mode operation instruction[ 2012-11-26 ]
Make measurement mode change into measurement height weight mode 1. Use RS232 line to connect with computer 2. Open ”Terminal” Serial software, as picture1:
maintainance-no voice[ 2012-12-13 ]
how to solve the problem-no voice cause one: Change a new communication IC.   analysis: 1. The volume has been already reduced to the minimum. 2. The speaker is damaged, or the power amplifier IC is burn down, or the line is a poor contact. sol...
how to changethe voice IC[ 2013-07-03 ]
How to change the voice IC
how to adjust the time for sk-x80[ 2013-02-17 ]
How to adjust the time for sk-x80 1.pls open the back door of the upper body. 2.pls press the number code"680" on the back keypad, then press"confirm". 3.input the NO. to adjust the time If now the date is 18th Feb,2013 and the time is ...
How to adujst height weight date and time for SK-X80TOUCH SCREEN?[ 2012-11-26 ]
How to adjust the height 1.pls turn on the scale and press "System Setting " to enter the setting system. 2.pls put 1m object on the platform and press "Height" and “Confirm”, you will see the result display on the screen , I...
blood pressure can not test solve method[ 2012-11-26 ]
First check the lines whether loose,pls pull out then re-insert. PLs see the pictures of two places to check
how to change coin mode into non-coin mode-sk-x80[ 2012-11-30 ]
Change coin mode into non-coin mode1. please connect the scale with a computer with a serial port line2. please open the software ”Terminal” as the picture showed:
adjustment of SK-X80 Full Function?[ 2012-11-26 ]
A.pls do not put anything on the platform B.pls put 20kg on the platform, open the backdoor of upper body of scale and press "weight" and "888" and confirm to measure, and you will see the result displays on the screen.
Adjustment of SK-V9?[ 2012-11-26 ]
A. pls do not put anything on the platform B. pls put 20kg on the platform, open the backdoor of upper body of scale and press "weight" and "888" and confirm to measure, and you will see the result displays on the screen.
Total number of records:28 | Pages:212